Sewage suction trucks are mainly used in some towns and cities sewage treatment and sewage treatment of some factories and enterprises, the use of a long time can not be avoided there will be some failures, affecting the efficiency of the work, take a look at the suction of sewage trucks failures of a simple emergency treatment.
1. oil pipe broken, this situation can find a and oil pipe diameter of the rubber or plastic pipe socket, if the socket is not tight enough, the ends can be tightened with wire to prevent oil leakage.
2. Suction truck inlet and outlet hose rupture, if the rupture is not big, you can use the cloth will leak a simple bandage, if the rupture is large, it is best to rupture on the set of bamboo pipe or iron pipe, and use the wire binding.
3. screw hole slippery wire, screw hole slippery wire will lead to oil leakage or connecting rod loose, so that it can not work, then you can use the original screw with a hammer to smash flat, so that the two sides of the expansion, and then fastened, this method can not be used many times, after the emergency in a timely manner to the repair station to repair.
4. Fuel tank leakage, this situation must be dealt with in a timely manner, otherwise prone to other dangerous accidents, at this time the first oil leakage can be wiped clean, the use of soap or bubble gum coated in the oil leakage, temporarily blocking the loophole, if there is an epoxy resin adhesive is even better, directly use it to repair, the effect will be better.
5. Oil leakage at the oil pipe joints, suction trucks in use, if there is engine oil leakage at the oil pipe joints, most of the oil pipe flare and oil pipe nut sealing is not good, at this time you can use cotton gauze wrapped around the lower edge of the flare, and then tighten the oil pipe nut with the oil pipe joints, but also chewing gum or chewing maltose into a paste, coated in the oil pipe nut seating mouth, to be dried and condensed to play a role in the sealing.
6. Fan belt breakage, then the broken belt can be wrapped with wire, or the use of start-stop approach to drive the car away.
7. Fuel line rupture, this situation can be first wiped clean the rupture, apply soap or the use of tape wrapped around the entire rupture of the fuel line, and the use of wire tied tightly, and then coated with a layer of soap can be.
8. Suction truck cylinder head sand hole and oil leakage, water leakage, this time according to the size of the sand hole, selection of the corresponding specifications of the electrician with a fuse, with a hammer gently smashed into the sand hole, you can eliminate the leakage of oil, water.