ZG3210-9D Hydraulic ExcavatorChina famous brand special purpose vehicle manufacturing company

ZG3210-9D Hydraulic Excavator

Model brand/
Chassis brand/
Capacity/

Sales manager: Mike Yin
Phone: +86 13135737018
Email: mikeyin1990@hotmail.com
Whatsapp online:

Whatsapp qr code

Product Presentation

Product specification

1. Introduction：

Equipped with Cummins engine, strong power, high efficiency, energy saving, reliable and durable; advanced negative flow hydraulic system, comfortable operation, high operating efficiency, excellent cost performance; full power control, four power modes to adapt to different working conditions; stepper motor accurately controls the throttle , Significantly reduce fuel consumption; full 3D modeling and finite element analysis technology to ensure the reliability and stability of structural parts.

2. Characteristics：

(1) Equipped with Cummins engine, high load resistance, high horsepower output, high reliability, low fuel consumption, significantly reduce the use and maintenance costs

(2)Advanced negative flow hydraulic system is adopted, which has better system stability and reliability, faster compound action speed and higher operating efficiency.

(3) High-strength reinforced box-type side beams and X-shaped middle frames, high-reliability towline wheels and track rollers, can withstand the impact caused by excessive loads.

(4) Intelligent electronic monitoring system, real-time monitoring, self-diagnosing fault alarm, maintenance information prompt.

3、Overall Dimension

名称ITEM		单位UNIT	技术规格Specifications
名称ITEM		单位UNIT	ZG3210-9D
操作重量Operating weight		Kg	20750
标配斗容(加强斗) Rated bucket capacity		m³	1.0
总长 Overall length	A	mm	9520
总宽（600mm履带） Overall width（600mm track shoe）	B	mm	2800
总高 Overall height	C	mm	3030
转台宽度Trunable width	D	mm	2700
驾驶室离地高Cabin height	E	mm	2958
配重离地间隙 Groundclearance of counterweight	F	mm	1025
发动机罩高 Engine cover height	G	mm	2338
最小离地间隙 Min. ground clearance	H	mm	470
转台尾端长度 Tail length	I	mm	2800
尾端回转半径 Turning radius of turnable	I’	mm	2800
履带轴距 Wheel base of track shoe	J	mm	3370
底盘长度 Chassis length	K	mm	4160
底盘宽度 Chassis width	L	mm	2800
履带轨距 Track shoe gauge	M	mm	2200
标配履带宽度 Standard track shoe width	N	mm	600
最大牵引力 Max. traction		KN	194
行走速度（高/低） Travelling speed (H/L)		Km/hr	5.5/3.6
回转速度 Swing speed		rpm	12
爬坡能力 Gradeability		Degree(%)	35（70%）
接地比压 Ground pressure		Kgf/cm²	0.452

4、Working range

类别 ITEM		2700 mm斗杆Stick (mm)
类别 ITEM		ZG3210-9D
最大挖掘半径 Maximum digging radius	A	9845
地面最大挖掘半径 Ground maximum digging radius	A’	9680
最大挖掘深度 Maximum digging depth	B	6475

最大垂直挖掘深度 Maximum vertical digging depth	C	5750
最大挖掘高度 Maximum digging height	D	9728
最大卸载高度 Maximum dumping height	E	6805
最小前部回转半径 Min. front turning radius	F	3565
铲斗挖掘力 Bucket digging force	ISO	150 KN
斗杆挖掘力 Stick digging force	ISO	105 KN

5. 发动机性能参数 Engine specifications

规格参数 Specifications	型号 Model		康明斯 Cummins 6B5.9-C150
	型式 Type		六缸直列、四冲程涡轮增压 6-cylinder in-line, four-stroke turbocharger
	排放 Emission		国Ⅱ National Ⅱ
	冷却方式 Cooling method		水冷 Water cooled
	缸径×行程 Bore diameter × stroke	mm	102×120
	气缸排量 Displacement	L	5.883
	额定功率 Rated power		112KW（150PS）@1950rpm
	最大扭矩Max. torque	N.m	614N.m@1500rpm
	机油量 Engine oil capacity	L	24
	额定油耗率 Rated diesel consumption	g/ps.hr(rpm)	208g/ps.hr(1500rpm)
	起动马达 Starter		DENSO 24V/4.5KW
	发电机 Generator		DELCO 24SI 28V/70A

6. 主要部件配置 Main configuration

部件机型	ZG3210-9D
部件机型	ZG3210-9D
排放等级 Emission	国二 National Ⅱ
发动机 Engine	东风康明斯DONGFENG Cummins 6B5.9-C150
主泵 Main pump	韩川液压 KAWASAKI K3V112DT
主控阀 Main valve	国机或常林SINOMACH XOV25_GJ001
回转马达 Swing motor	韩川液压 KAWASAKI M5X130CHB
行走马达Travelling motor	韩川液压 KAWASAKI FTD45V
履带 Track	徐工 XCMG
空调 AC	斗源 DOOWON
回转支承 Slewing ring	马鞍山方圆 FANGYUAN
动臂 Arm	常林CHANGLIN 5.68m
斗杆 Stick	常林CHANGLIN 2.7m
铲斗 Bucket	常州聚科JUKE 1.0m³
上下车架 Frame	常林CHANGLIN

Factory photos

Inquiry

name*

email*

Phone/what*

content*

Contact us

Whatsapp online：

phone：+86 13135737018

Sales manager：Mike Yin

Address：South Suburb Chengli Automobile Industry Park, Suizhou, Hubei, China